Hints for Correctly Using NBK Products
The video is an example using
CUAB( CUAB). You can perform the same operation using this product.
Unit : mm
＊1： Some tablet PC models may not be mountable. We will lend sample models to confirm that your device can be mounted. Please contact our customer service.
Bottom Arm SPHC
Nylon Coating (Tip Only)
Knob Thread Part
Trivalent Chromate Treatment
Bottom Arm Fixing Bolt
Ferrosoferric Oxide Film
Holder for mounting tablet PCs to vertical axis round pipes/round shafts.
Mounting to round pipes/round shafts uses
CUPB （ CUPB） for simple positioning.
Push the push button to unlock the lock, smoothly move the bracket vertically, and release the push button to fix it in position.
It can be moved upward without pushing the push button, just by applying force.
Load capacity of up to 5 kg.
Tablet PCs between 9 and 12 inches
＊1 can be mounted by adjusting the side arm and bottom arm.
＊1： 9-inch and 10-inch tablet PCs can only be installed horizontally.
Select the model number depending on the thickness of the tablet PC to be mounted.
Tablet PC Thickness 6-13 mm---- DTAC- 13-330-PB-＊＊-BK 13-20 mm---- DTAC- 20-330-PB-＊＊-BK
The nylon coating on the arm tip and the cushioning seal on the base prevent the tablet PC from being scratched.
Applicable Round Pipe/Round Shaft Diameter
Push Button Press Count Resistance
＊1 20,000 Times
＊1： Values are for reference only. They are not guaranteed values.
Machine tool / Medical equipment / FPD production device / Semiconductor manufacturing device / Packing machine / Food machinery
Round Pipe/Round Shaft Mounting Method
Tablet PC Mounting Method
Height Adjustment Method
＊1： The tablet PC may fall out of the holder if not tightened sufficiently.
Precautions for Use
Mount to a vertical axis.
DTAC-PB requires vertical mounting. If mounted upside-down, DTAC-PB cannot remain fixed onto round pipes/round shafts.
It will prevent rotating movements, but it will not be able to remain completely fixed.
DTAC-PB is a product that uses friction fastening. In cases where oil, etc. adhered to the round pipe/round shaft causes the friction coefficient to decrease or if impact loads or vibrations occur, the maximum load weight may decrease.
The surface may be scratched depending on the material and surface finish of the round pipe/round shaft.
If excessive loads are applied, then the round pipe/round shaft may be scratched or
DTAC-PB may be damaged.
Brackets for convenient positioning on round pipes