Easy automation of manual positioning
* The EPU-100 and EPL-48-D6-D6 have been discontinued as of June 2024.
For more details, please click here.
Instead of manual handle operation, our equipment enables automatic positioning.
Batch control of multiple units is possible, dramatically reducing setup time.
The built-in motor rotates the feed screw,
grasping the present position via the encoder and stopping at the target position.
Positioning is automated.
The time needed for setup is reduced by automating the positioning work that comes up frequently when changing models, improving productivity.
Automation of positioning work reduces setup errors caused by manual work, preventing damaged products and quality defects.
Remote operation enables avoidance of work involving fall or contact hazards, such as in high places or with machine interference, allowing work to be done from a safe place.
Automating work in tight spaces or places with obstacles enables working efficiency to be improved while reducing physical strain.
More detailed information on dimensions,
performance, etc. is available
Batch control of up to 32 units is possible.
Each can also perform different movements.
System Configuration is here
When the time-consuming manual positioning of multiple locations is automated, they can be batch controlled, reducing total positioning time.
The dedicated software function enables numerical setting for up to 1,000 setups.* Daily setup time is reduced.
When changing models on the same line multiple times a day, automated line positioning can result in large total time savings. It also helps simplify complex positioning work, making handle operation order errors impossible. * EPC-100: Max. 1,000
EPC-200-CC, EPC-210-EIP: Max. 100
Mounting can be completed simply by replacing the installed operation handle. Complex installation is not required.
Actual mounting video available here
* By drilling a hole for the positioning pin in equipment or devices, it is also possible to mount the unit without the dedicated mounting plate.
Because the control software can be used free of charge, costs and time required are minimized compared to the construction of an original automated positioning system. The automated system can be easily mounted.
Software is available here
Compared with the use of a combined handle and indicator, it is thinner and more compact. It also contributes to space-saving without affecting the workability of the production line or equipment.
Signals from the transceiver to each unit are transmitted* wirelessly, with no cable wiring required. No troublesome wiring is needed for the production line or equipment. Wired connection is also possible. * EPU-220
Dust-proof and waterproof structure achieves IP65* protection class. It can be used safely even in environments where it may be exposed to dust or water.* EPU-210, EPU-220
More detailed information on dimensions, performance, etc. is available
Select according to your operating environment.
* Swipe to scroll.
 EPU-210 |
 EPU-220 |
||
|---|---|---|---|
| Rated Torque (Standard) | 0.8N・m | 0.8N・m | |
| Rated Torque (Using High Torque Adapter) | 2.7N・m*1 / 5.4N・m*2 | 2.7N・m*1 / 5.4N・m*2 | |
| Wired Connection | ○ | ○ | |
| Wireless Connection | × | ○ | |
| Display | ○ | × | |
| Use as a single unit | ○*3 | × | |
| IP code | IP65 | IP65 | |
| Ext. dimensions (excluding the power cable and protrusions) | 45mm×150mm×45mm | 45mm×150mm×45mm | |
| *1: When used in combination with High Torque Adapter EOAT-200-4 *2: When used in combination with High Torque Adapter EOAT-200-8 *3: Usable without PC, PLC, or EPC-200-CC, EPC-210-EIP, EPC-100 transceivers |
|||
More detailed information on dimensions, performance, etc. is available