Specs/CAD
Part Number | M (Coarse) Nominal of Thread |
Pitch | Lm | R | H | H' | h | s | D | d | Dw | tw | s1 | B*1 | Tooth No. | Max. Load | Max. Clamping Force | Mass (g) |
Body Color |
Price (USD) |
CAD Download |
Add to Cart |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
LEMS-6-12-LW20-BK | M6 | 1 | 12 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | BK | 17.62 | CAD | Cart |
LEMS-6-12-LW20-OR | M6 | 1 | 12 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | OR | 17.62 | CAD | Cart |
LEMS-6-12-LW20-SG | M6 | 1 | 12 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | SG | 17.62 | CAD | Cart |
LEMS-6-16-LW20-BK | M6 | 1 | 16 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | BK | 17.62 | CAD | Cart |
LEMS-6-16-LW20-OR | M6 | 1 | 16 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | OR | 17.62 | CAD | Cart |
LEMS-6-16-LW20-SG | M6 | 1 | 16 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 22 | SG | 17.62 | CAD | Cart |
LEMS-6-20-LW20-BK | M6 | 1 | 20 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 23 | BK | 17.62 | CAD | Cart |
LEMS-6-20-LW20-OR | M6 | 1 | 20 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 23 | OR | 17.62 | CAD | Cart |
LEMS-6-20-LW20-SG | M6 | 1 | 20 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 23 | SG | 17.62 | CAD | Cart |
LEMS-6-25-LW20-BK | M6 | 1 | 25 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 24 | BK | 17.62 | CAD | Cart |
LEMS-6-25-LW20-OR | M6 | 1 | 25 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 24 | OR | 17.62 | CAD | Cart |
LEMS-6-25-LW20-SG | M6 | 1 | 25 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 24 | SG | 17.62 | CAD | Cart |
LEMS-6-32-LW20-BK | M6 | 1 | 32 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 25 | BK | 17.62 | CAD | Cart |
LEMS-6-32-LW20-OR | M6 | 1 | 32 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 25 | OR | 17.62 | CAD | Cart |
LEMS-6-32-LW20-SG | M6 | 1 | 32 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 25 | SG | 17.62 | CAD | Cart |
LEMS-6-40-LW20-BK | M6 | 1 | 40 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 26 | BK | 17.62 | CAD | Cart |
LEMS-6-40-LW20-OR | M6 | 1 | 40 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 26 | OR | 17.62 | CAD | Cart |
LEMS-6-40-LW20-SG | M6 | 1 | 40 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 26 | SG | 17.62 | CAD | Cart |
LEMS-6-50-LW20-BK | M6 | 1 | 50 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 28 | BK | 18.08 | CAD | Cart |
LEMS-6-50-LW20-OR | M6 | 1 | 50 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 28 | OR | 18.08 | CAD | Cart |
LEMS-6-50-LW20-SG | M6 | 1 | 50 | 45 | 35.5 | 39 | 24.5 | 4.2 | 13 | 10 | 20 | 2 | 5 | 6.6 | 18 | 70 | 3.8 | 28 | SG | 18.08 | CAD | Cart |
Nabeya Bi-tech Kaisha
Customer Service
Please enter questions about customization and other product-related inquiries here.
Find the inquiry form hereMaterial/Finish
LEMS-LW | |
---|---|
Lever Part | Nylon 6 (Various Color) |
Thread Part | SUS303 |
Setscrew | Stainless Steel |
Serration Ring (Insert) | Zinc Die Cast |
Plain Washer | SUS303 |
Spring | Stainless Steel Wire |
Characteristics
- Plastic clamp lever with plain washer.
- Plain washers are built into the relief cut section to prevent them from falling off. This also eliminates the need to mount washers.
- The outside diameter of the plain washer is about 3 times the screw diameter. This provides a sufficient seating surface for the tightening area.
- Suitable for tightening resin components or slotted components where the seating surface pressure cannot be increased.
- The zinc die cast serration ring is inserted into the plastic lever main unit. It achieves sufficient fitting strength with the metal screw serrations.
- The lever is available in 3 color variations. They can be selected by the end symbol of the part number.
End Symbol | Lever Part Color |
---|---|
BK | Matte Black |
SG | Matte Silver |
OR | Matte Orange |