All Stainless Steel Products
| Image |  |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | LGSS | KMDFS | KNMS | KNMS-BK | KNFS | KUMS | KUMS-BK | KUFS | KNMS-SC |
| Part Name | Shaft for Grip Lever | Stainless Steel Hand Knob | Knurled Knob | Knurled Knob - Stainless Steel Black | Knurled Knob | Knurled Knob | Knurled Knob - Stainless Steel Black | Knurled Knob | Captive Knurled Knob |
| Material | - | - | - | - | - | - | - | - | - |
| Feature | Used in combination with Grip | Ergonomic, easy to grip design | SUS303 | Reflection Resistance Corrosion Resistance |
SUS303 | Flat Type | Reflection Resistance Corrosion Resistance |
Flat Type | Captive SUS304 |
| Image |  |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | KUMS-SC | KWBS-SC | UNMS-SC | UNFS | UNFS-H | UNFS-SH | TGY | TG | PAFS |
| Part Name | Captive Knurled Knobs | Captive Wing Knob | Captive Pull | U - shaped Pull | U - shaped Pull | U - shaped Pull | Stainless Steel Pull | Stainless Steel Pull | Miniature Ball Plunger (Made of Stainless Steel) |
| Material | - | - | - | - | - | - | - | - | Stainless Steel |
| Feature | Captive SUS304 |
- | Captive | SUS304 | Total height is higher than UNFS | SEMI Standard | SUS303 | SUS303 | Good Cost Performance |
| Image |  |
 |
 |
/4556_1.jpg?awscf_publishdate=2021-04-15 18:15) |
 |
/4556_1.jpg?awscf_publishdate=2021-04-15 18:15) |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | MPS | PSPS | SCSS-R | SCSS-R(INCH) | SCSS-F | SCSS-F(INCH) | SCSS-FB | SCSS-GB | SCBS-R |
| Part Name | Miniature Ball Plunger (Made of Stainless Steel) | Short Stroke Plungers (Made of Stainless Steel) | Clamping Screw - Full Ball | Clamping Screws - Full Ball (Inch Thread) | Clamping Screw - Flat Ball | Clamping Screws - Flat Ball (Inch Thread) | Clamping Screw - Flat Ball - with Reversal Protection Mechanism | Clamping Screw - Indented Ball - with Reversal Protection Mechanism | Clamping Bolt - Full Ball |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Feature | Spinning ball | Pin Plungers | Complete Ball Type | Full Ball Type Inch Thread |
Flat Ball Type | Flat Ball Type Inch Thread |
Flat Ball Limited Swivel Type |
Ratchet Ball Limited Swivel Type |
Complete Ball Type |
| Image | /4556_1.jpg?awscf_publishdate=2021-04-15 18:15) |
 |
/4556_1.jpg?awscf_publishdate=2021-04-15 18:15) |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | SCBS-R(INCH) | SCBS-F | SCBS-F(INCH) | SCBS-GB | SCBS-FB | SADS-LC | SADS-RF | SADS-SD | SADS-FT |
| Part Name | Clamping Bolts - Full Ball (Inch Thread) | Clamping Bolt - Flat Ball | Clamping Bolts - Flat Ball (Inch Thread) | Clamping Bolt - Knurled Ball - with Reversal Prevention Mechanism | Clamping Bolt - Flat Ball - with Reversal Prevention Mechanism | Screw Adaptor - Left-handed Threaded Type | Screw Adaptor - Fine Threaded Type | Screw Adaptor - Thread Size Conversion Type | Screw Adaptor - Long Threaded Type |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Feature | Full Ball Type Inch Thread |
Flat Ball Type | Flat Ball Type Inch Thread |
Ratchet Ball Limited Swivel Type |
Flat Ball Limited Swivel Type |
Left Hand Thread Type | Fine Screw Threaded Type | Thread Size Conversion Type | Continuous Thread Type |
| Image |  |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | SSBS-B | SANS-B | HSM | HSM-N | GIRS-SS | GSS | FCCS | FCCS-C | FCFS |
| Part Name | Stopper Bolt - Head Sphere Type | Stopper Screw | Stainless Steel Handwheel | Stainless Steel Handwheel | Stainless Steel Revolving Grip | Stainless Steel Fixing Grip | Cross Clamper - Set Screw Type | Cross Clamper - Clamping Type | Free Cross Clamper |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Feature | Positioning at Hex Head Hex Head is Heat-hardened |
Fine Pitch Screw Sphericity Area is Heat-hardened |
SCS13 With threaded hole for Grip |
SCS13 Without threaded hole for Grip |
All Stainless Steel Easy to Clean |
Corrosion Resistance High Strength |
Set Screw Type Suitable for Round and Square Shaft |
Clamping Type Suitable for Round and Square Shaft |
Free Cross Type One-side Clamping Type Suitable for Round and Square Shaft |
| Image |  |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | FCTS-C | FBCS-C | SRCS | SRFS | STRS | SJNS | SPOS-A | SPOS-B | SHAS |
| Part Name | T-Cross Clamper | Cross Bracket | Roller Chain Bolt | Roller Chain Nut | Turn Buckle - Dedicated to Roller Chain | Joint Nut | Spring Posts | Spring Posts | Hexagon Post |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Feature | T-Cross Type Clamping Type Suitable for Round and Square Shaft |
Suitable for Aluminum-Frame Round and Square Shaft |
Standardizing Right and Left Screw | Nut Type | Adjusting Chain Tension | Used in combination with SRCS | For Extension Spring,Bore type | For Extension Spring,Groove type | Male Screw and Female Screw on the Opposite side |
| Image |  |
 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|---|---|
| Part Number | SHBS | NSC-S | NSCS-S | NSCSS-S | NSC-SP2 | NSCS-SP2 | NSC-SB | NSCS-SB | PSTS |
| Part Name | Hexagon Post | Set Collar - Set Screw Type | Set Collar - Clamping Type | Set Collar - Split-type | Set Collar - with Installation Hole - Set Screw Type | Set Collar - with Installation Hole - Clamping Type | Set Collar (Made of Stainless Steel) - For Securing Bearing - Set Screw Type | Set Collar (Made of Stainless Steel) - For Securing Bearing - Clamping Type | Spring Stop |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - |
| Feature | Female Screw on Both side | Set Screw Type | Clamping Type | Split Type | With Installation Holes Set screw Type |
With Installation Holes Clamping Type |
Use with Ball Bearing Set Screw Type |
Use with Ball Bearing Clamping Type |
Positioning Stopper |
| Image |  |
||||||||
|---|---|---|---|---|---|---|---|---|---|
| Part Number | PHL | ||||||||
| Part Name | Plunger Holder | ||||||||
| Material | - | ||||||||
| Feature | Holder for use with Plunger |
Helpful Resources
Search by purpose
Product IntroductionCustomizationServices & Product OptionsIssue/case studiesTechnical DataUsageSelection MethodInstallation Method/MaintenanceSafety PrecautionsGlossary
Search by keyword
Improved productivity/workabilitySafety measures/precautionary measuresReduced cost/energy saving/long lifeVibration prevention/high precisionCompact/space-saving/lightweightCustomizationHigh strength/high rigidityHeat resistance/corrosion resistanceElegant functionality/designCleanroom/vacuum/non-magneticSeizing PreventionAutomation/robots/motorizationOthers
Search by industry
Machine ToolsSemiconductor Manufacturing EquipmentFood MachineryAutomotive Manufacturing ProcessMedical EquipmentFA Devices
Search by series
Video LibraryHints for correctly using NBK productsSolution samplesWhat is a Screw?Description of Mechanical Components for EngineersDescription of Special Screws for Engineers3 Min Engineering TipsServices & Product OptionsTechnical Data