All Metal

Image Clamping Screw - Full Ball Clamping Screws - Full Ball (Inch Thread) Clamping Screw (Fine Screw Thread) - Full Ball Clamping Screws - Full Ball (Inch Thread) Clamping Screw - Full Ball Short Stroke Plungers (Made of Stainless Steel)
Number SCSS-R SCSS-R(INCH) SCS-F-R SCS-R(INCH) SCS-R PSPS
Name Clamping Screw - Full Ball Clamping Screws - Full Ball (Inch Thread) Clamping Screw (Fine Screw Thread) - Full Ball Clamping Screws - Full Ball (Inch Thread) Clamping Screw - Full Ball Short Stroke Plungers (Made of Stainless Steel)
Feature Complete Ball Type Full Ball Type
Inch Thread		 Fine Pitch Screw / Complete Ball Type Full Ball Type
Inch Thread		 Complete Ball Type Pin Plungers
Image Miniature Ball Plunger (Made of Stainless Steel) Miniature Ball Plunger (Made of Stainless Steel) Miniature Ball Plunger Zinc Pull Zinc Pull Stainless Steel Pull
Number MPS PAFS PAF TC TCY TG
Name Miniature Ball Plunger (Made of Stainless Steel) Miniature Ball Plunger (Made of Stainless Steel) Miniature Ball Plunger Zinc Pull Zinc Pull Stainless Steel Pull
Feature Spinning ball Good Cost
Performance		 Good Cost
Performance		 Zinc Di-cast Zinc Di-cast SUS303
Image Stainless Steel Pull U-shaped Pull - with Washer U-shaped Pull - with Washer U-shaped Pull - with Washer U-shaped Pull - with Washer U - shaped Pull
Number TGY UNFS-SH-W UNF-SH-W UNFS-H-W UNF-H-W UNFS-SH
Name Stainless Steel Pull U-shaped Pull - with Washer U-shaped Pull - with Washer U-shaped Pull - with Washer U-shaped Pull - with Washer U - shaped Pull
Feature SUS303 SEMI Standard
Accessory Washer		 SEMI Standard
Accessory Washer		 Total height is higher than UNFS
Accessory Washer		 Total height is higher than UNF
Accessory Washer		 SEMI Standard
Image U - shaped Pull U - shaped Pull U - shaped Pull U-shaped Pull - with Washer U-shaped Pull - with Washer Clamping Screw - Special Material Full Ball
Number UNF-SH UNFS-H UNF-H UNFA-W UNFS-W SCS-BR
Name U - shaped Pull U - shaped Pull U - shaped Pull U-shaped Pull - with Washer U-shaped Pull - with Washer Clamping Screw - Special Material Full Ball
Feature SEMI Standard Total height is higher than UNFS Total height is higher than UNF Total height is low
Accessory Washer		 SUS304
Accessory Washer		 Complete Ball Type
Brass Ball
Image Clamping Screw - Flat Ball Clamping Screws - Flat Ball (Inch Thread) Clamping Screw (Fine Screw Thread) - Flat Ball Clamping Screw - Flat Ball Clamping Screws - Flat Ball (Inch Thread) Clamping Screw - Flat Ball - with Reversal Protection Mechanism
Number SCS-F SCS-F(INCH) SCS-F-F SCSS-F SCSS-F(INCH) SCS-FB
Name Clamping Screw - Flat Ball Clamping Screws - Flat Ball (Inch Thread) Clamping Screw (Fine Screw Thread) - Flat Ball Clamping Screw - Flat Ball Clamping Screws - Flat Ball (Inch Thread) Clamping Screw - Flat Ball - with Reversal Protection Mechanism
Feature Flat Ball Type Flat Ball Type
Inch Thread		 Fine Pitch Screw / Flat Ball Type Flat Ball Type Flat Ball Type
Inch Thread		 Flat Ball
Limited Swivel Type
Image Clamping Screw - Flat Ball - with Reversal Protection Mechanism Clamping Screw - Indented Ball - with Reversal Protection Mechanism Clamping Screw - Indented Ball - with Reversal Protection Mechanism U-shaped Pull - with Washer Shaft for Grip Lever Captive Pull
Number SCSS-FB SCS-GB SCSS-GB UNF-W LGSS UNMS-SC
Name Clamping Screw - Flat Ball - with Reversal Protection Mechanism Clamping Screw - Indented Ball - with Reversal Protection Mechanism Clamping Screw - Indented Ball - with Reversal Protection Mechanism U-shaped Pull - with Washer Shaft for Grip Lever Captive Pull
Feature Flat Ball
Limited Swivel Type		 Ratchet Ball
Limited Swivel Type		 Ratchet Ball
Limited Swivel Type		 Low price
Accessory Washer		 Used in combination with Grip Captive
Image Knurled Knob Knurled Knob Knurled Knob Clamp Knob Captive Knurled Knob Captive Knurled Knob
Number KNFS KNF KNM KCFS KUM-SC KNM-SC
Name Knurled Knob Knurled Knob Knurled Knob Clamp Knob Captive Knurled Knob Captive Knurled Knob
Feature SUS303 Chrome Plating Chrome Plating SUS303 Captive Captive
Image Knurled Knob Knurled Knob Knurled Knob - Stainless Steel Black Knurled Knob Knurled Knob Hexagon Knob
Number KUFS KUF KUMS-BK KUMS KUM KKT
Name Knurled Knob Knurled Knob Knurled Knob - Stainless Steel Black Knurled Knob Knurled Knob Hexagon Knob
Feature Flat Type Flat Type Reflection Resistance
Corrosion Resistance		 Flat Type Flat Type FC200
Image Clamping Bolts - Full Ball (Inch Thread) Clamping Bolt - Full Ball Clamping Bolts - Full Ball (Inch Thread) Clamping Bolt - Flat Ball Clamp Knob Screw Adaptor - Left-handed Threaded Type
Number SCB-R(INCH) SCBS-R SCBS-R(INCH) SCB-F KCF SADS-LC
Name Clamping Bolts - Full Ball (Inch Thread) Clamping Bolt - Full Ball Clamping Bolts - Full Ball (Inch Thread) Clamping Bolt - Flat Ball Clamp Knob Screw Adaptor - Left-handed Threaded Type
Feature Full Ball Type
Inch Thread		 Complete Ball Type Full Ball Type
Inch Thread		 Flat Ball Type S45C Left Hand Thread Type
Image Hexagon Knob Stainless Steel Hand Knob Shaft for Grip Lever U - shaped Pull U - shaped Pull Clamping Bolt - Full Ball
Number KK KMDFS LGS UNFS UNF SCB-R
Name Hexagon Knob Stainless Steel Hand Knob Shaft for Grip Lever U - shaped Pull U - shaped Pull Clamping Bolt - Full Ball
Feature FC200 Ergonomic, easy to grip design Used in combination with Grip SUS304 Low price Complete Ball Type
Image Aluminum Knurled Handwheel Metal Knob Clamping Bolts - Flat Ball (Inch Thread) Clamping Bolt - Flat Ball Clamping Bolts - Flat Ball (Inch Thread) Clamping Bolt - Knurled Ball - with Reversal Prevention Mechanism
Number HAK EAT SCB-F(INCH) SCBS-F SCBS-F(INCH) SCB-GB
Name Aluminum Knurled Handwheel Metal Knob Clamping Bolts - Flat Ball (Inch Thread) Clamping Bolt - Flat Ball Clamping Bolts - Flat Ball (Inch Thread) Clamping Bolt - Knurled Ball - with Reversal Prevention Mechanism
Feature With Prepared-bore
With threaded hole for Grip		 Aluminum Flat Ball Type
Inch Thread		 Flat Ball Type Flat Ball Type
Inch Thread		 Ratchet Ball
Limited Swivel Type
Image Clamping Bolt - Flat Ball - with Reversal Prevention Mechanism Screw Adaptor - Long Threaded Type Screw Adaptor - Long Threaded Type Stopper Bolt - Head Sphere Type Stopper Screw Stopper Screw
Number SCBS-FB SAD-FT SADS-FT SSBS-B SAN-B SANS-B
Name Clamping Bolt - Flat Ball - with Reversal Prevention Mechanism Screw Adaptor - Long Threaded Type Screw Adaptor - Long Threaded Type Stopper Bolt - Head Sphere Type Stopper Screw Stopper Screw
Feature Flat Ball
Limited Swivel Type		 Continuous Thread Type Continuous Thread Type Positioning at Hex Head
Hex Head is Heat-hardened		 Fine Pitch Screw
Sphericity Area is Heat-hardened		 Fine Pitch Screw
Sphericity Area is Heat-hardened
Image Stop Pin Screw Adaptor - Fine Threaded Type Screw Adaptor - Thread Size Conversion Type Knurled Knob - Stainless Steel Black Knurled Knob Aluminum Disk Handwheel
Number SPM SADS-RF SADS-SD KNMS-BK KNMS HDA-N
Name Stop Pin Screw Adaptor - Fine Threaded Type Screw Adaptor - Thread Size Conversion Type Knurled Knob - Stainless Steel Black Knurled Knob Aluminum Disk Handwheel
Feature Used in combination with SSB/SAN
Hex Head is Heat-hardened		 Fine Screw Threaded Type Thread Size Conversion Type Reflection Resistance
Corrosion Resistance		 SUS303 Shot Blasting
Without threaded hole for Grip
Image Stopper Bolt - Tip Sphere Type Stopper Bolt - Head Sphere Type Aluminum Revolving Grip Stainless Steel Revolving Grip Plated Revolving Grip Straight Fixing Grip
Number SSB-A SSB-B GIRA-EL GIRS-SS RM HS
Name Stopper Bolt - Tip Sphere Type Stopper Bolt - Head Sphere Type Aluminum Revolving Grip Stainless Steel Revolving Grip Plated Revolving Grip Straight Fixing Grip
Feature Positioning at a tip of Screw
Sphericity Area is Heat-hardened		 Positioning at Hex Head
Hex Head is Heat-hardened		 Aluminum
Easy to Clean		 All Stainless Steel
Easy to Clean		 Designed for Easy to grip Light-weight Grip
Image Plated Fixing Grip Stainless Steel Fixing Grip Cross Clamper - Set Screw Type Cross Clamper - Set Screw Type Cross Clamper - Clamping Type Cross Clamper - Clamping Type
Number SM GSS FCCA FCCS FCCA-C FCCS-C
Name Plated Fixing Grip Stainless Steel Fixing Grip Cross Clamper - Set Screw Type Cross Clamper - Set Screw Type Cross Clamper - Clamping Type Cross Clamper - Clamping Type
Feature Designed for Easy to grip Corrosion Resistance
High Strength		 Set Screw Type
Suitable for Round and Square Shaft		 Set Screw Type
Suitable for Round and Square Shaft		 Clamping Type
Suitable for Round and Square Shaft		 Clamping Type
Suitable for Round and Square Shaft
Image Free Cross Clamper Free Cross Clamper T-Cross Clamper T-Cross Clamper Cross Bracket Cross Bracket
Number FCFA FCFS FCTA-C FCTS-C FBCA-C FBCS-C
Name Free Cross Clamper Free Cross Clamper T-Cross Clamper T-Cross Clamper Cross Bracket Cross Bracket
Feature Free Cross Type
One-side Clamping Type		 Free Cross Type
One-side Clamping Type		 T-Cross Type
Clamping Type		 T-Cross Type
Clamping Type		 Suitable for Aluminum-Frame
Round and Square Shaft		 Suitable for Aluminum-Frame
Round and Square Shaft
Image Aluminum Offset Handwheel Aluminum Flat Handwheel Adjust Bolt Aluminum Knurled Handwheel Aluminum Knurled Handwheel Aluminum Knurled Handwheel
Number AV AH-N SAT HAK-R-N HAK-FH HAK-R-FH
Name Aluminum Offset Handwheel Aluminum Flat Handwheel Adjust Bolt Aluminum Knurled Handwheel Aluminum Knurled Handwheel Aluminum Knurled Handwheel
Feature AC8A
With threaded hole for Grip		 AC8A
Without threaded hole for Grip		 Used in combination with SAK With Plain bore
Without threaded hole for Grip		 With Prepared-bore
With finger hole		 With Prepared-bore
Without finger hole
Image Stainless Steel Handwheel Offset Handwheel Offset Handwheel Flat Handwheel Flat Handwheel Aluminum Disk Handwheel
Number HSM D D-N F F-N HDA
Name Stainless Steel Handwheel Offset Handwheel Offset Handwheel Flat Handwheel Flat Handwheel Aluminum Disk Handwheel
Feature SCS13
With threaded hole for Grip		 Chrome Plating
With threaded hole for Grip		 Chrome Plating
Without threaded hole for Grip		 Chrome Plating
With threaded hole for Grip		 Chrome Plating
Without threaded hole for Grip		 Shot Blasting
With threaded hole for Grip
Image Knurled Handwheel Knurled Handwheel Roller Chain Bolt Roller Chain Bolt Aluminum Offset Handwheel Aluminum Flat Handwheel
Number FS FS-N SRC SRCS AV-N AH
Name Knurled Handwheel Knurled Handwheel Roller Chain Bolt Roller Chain Bolt Aluminum Offset Handwheel Aluminum Flat Handwheel
Feature Chrome Plating
With threaded hole for Grip		 Chrome Plating
Without threaded hole for Grip		 Standardizing Right and Left Screw Standardizing Right and Left Screw AC8A
Without threaded hole for Grip		 AC8A
With threaded hole for Grip
Image Roller Chain Nut Roller Chain Nut Hexagon Stud Bolt Clamping Bolt - Knurled Ball - with Reversal Prevention Mechanism Clamping Bolt - Flat Ball - with Reversal Prevention Mechanism Stainless Steel Handwheel
Number SRF SRFS SHS SCBS-GB SCB-FB HSM-N
Name Roller Chain Nut Roller Chain Nut Hexagon Stud Bolt Clamping Bolt - Knurled Ball - with Reversal Prevention Mechanism Clamping Bolt - Flat Ball - with Reversal Prevention Mechanism Stainless Steel Handwheel
Feature Nut Type Nut Type Standardizing Right and Left Screw Ratchet Ball
Limited Swivel Type		 Flat Ball
Limited Swivel Type		 SCS13
Without threaded hole for Grip
Image Joint Nut Spring Posts Hexagon Post Hexagon Post Turn Buckle - Dedicated to Roller Chain Turn Buckle - Dedicated to Roller Chain
Number SJNS SPOS-A SHA-EL SHAS STR STRS
Name Joint Nut Spring Posts Hexagon Post Hexagon Post Turn Buckle - Dedicated to Roller Chain Turn Buckle - Dedicated to Roller Chain
Feature Used in combination with SRCS For Extension Spring,Bore type Male Screw and Female Screw on the Opposite side Male Screw and Female Screw on the Opposite side Adjusting Chain Tension Adjusting Chain Tension
Image Set Collar - Set Screw Type Set Collar - Set Screw Type Joint Nut Set Collar - with Installation Hole - Set Screw Type Set Collar - with Installation Hole - Set Screw Type Set Collar - with Installation Hole - Set Screw Type
Number NSC-C NSC-M SJN NSC-CP2 NSC-MP2 NSC-SP2
Name Set Collar - Set Screw Type Set Collar - Set Screw Type Joint Nut Set Collar - with Installation Hole - Set Screw Type Set Collar - with Installation Hole - Set Screw Type Set Collar - with Installation Hole - Set Screw Type
Feature Set Screw Type Set Screw Type Used in combination with SRC With Installation Holes
Set screw Type		 With Installation Holes
Set screw Type		 With Installation Holes
Set screw Type
Image Set Collar - with Installation Hole - Clamping Type Washer Hexagon Post Hexagon Post Set Collar - For Securing Bearing - Set Screw Type Set Collar - Set Screw Type
Number NSCS-CP2 LY SHB-EL SHBS NSC-MB NSC-S
Name Set Collar - with Installation Hole - Clamping Type Washer Hexagon Post Hexagon Post Set Collar - For Securing Bearing - Set Screw Type Set Collar - Set Screw Type
Feature With Installation Holes
Clamping Type		 Used in combination with Pull Female Screw on Both side Female Screw on Both side Use with Ball Bearing
Set Screw Type		 Set Screw Type
Image Set Collar - Clamping Type Set Collar - Clamping Type Aluminum Knurled Handwheel Aluminum Knurled Handwheel Set Collar - Clamping Type Set Collar - with Installation Hole - Clamping Type
Number NSCS-C NSCS-M HAK-N HAK-R NSCS-S NSCS-MP2
Name Set Collar - Clamping Type Set Collar - Clamping Type Aluminum Knurled Handwheel Aluminum Knurled Handwheel Set Collar - Clamping Type Set Collar - with Installation Hole - Clamping Type
Feature Clamping Type Clamping Type With Prepared-bore
Without threaded hole for Grip		 With Plain bore
With threaded hole for Grip		 Clamping Type With Installation Holes
Clamping Type
Image Turn Buckle - General Purpose Male Screw Type Locating Block Set Collar - Split-type Set Collar (Made of Stainless Steel) - For Securing Bearing - Set Screw Type Set Collar - For Securing Bearing - Clamping Type Set Collar - For Securing Bearing - Clamping Type
Number STB SBN NSCSS-S NSC-SB NSCS-CB NSCS-MB
Name Turn Buckle - General Purpose Male Screw Type Locating Block Set Collar - Split-type Set Collar (Made of Stainless Steel) - For Securing Bearing - Set Screw Type Set Collar - For Securing Bearing - Clamping Type Set Collar - For Securing Bearing - Clamping Type
Feature Adjusting Chain Tension and Position of Slide For fixing SSB Split Type Use with Ball Bearing
Set Screw Type		 Use with Ball Bearing
Clamping Type		 Use with Ball Bearing
Clamping Type
Image Washer Captive Washer for Pull Captive Washer for Pull (with Captive Screw) Pipe Holder Round Pipe - Standard Type Spring Posts
Number LY-N LYSC-N LYSC-N-SSC DPH DAP SPOS-B
Name Washer Captive Washer for Pull Captive Washer for Pull (with Captive Screw) Pipe Holder Round Pipe - Standard Type Spring Posts
Feature Used in combination with Pull Captive Captive - - For Extension Spring,Groove type
Image Set Collar (Made of Stainless Steel) - For Securing Bearing - Clamping Type Set Collar - For Securing Bearing - Set Screw Type Spring Stop Spring Stop Wrench for Pin Plunger Plunger Holder
Number NSCS-SB NSC-CB PST PSTS PPW PHL
Name Set Collar (Made of Stainless Steel) - For Securing Bearing - Clamping Type Set Collar - For Securing Bearing - Set Screw Type Spring Stop Spring Stop Wrench for Pin Plunger Plunger Holder
Feature Use with Ball Bearing
Clamping Type		 Use with Ball Bearing
Set Screw Type		 Positioning
Stopper		 Positioning
Stopper		 Dedicated Wrench Holder for use with Plunger
Image Ball Button Locating Pin Bushing for Locating Pin - Straight Type Bushing for Locating Pin - Flange Type Set Collar - with Installation Hole - Clamping Type Block for Adjust Bolt
Number BB PJP PJA PJB NSCS-SP2 SAK-A
Name Ball Button Locating Pin Bushing for Locating Pin - Straight Type Bushing for Locating Pin - Flange Type Set Collar - with Installation Hole - Clamping Type Block for Adjust Bolt
Feature Used in combination with Plunger
For Heavy Load		 For Locating
Parallel Pin		 Used in combination with PJP Used in combination with PJP With Installation Holes
Clamping Type		 Used in combination with SAT
Image Set Collar - Split-type Set Collar - Split-type Block for Adjust Bolt
Number NSCSS-C NSCSS-M SAK-B
Name Set Collar - Split-type Set Collar - Split-type Block for Adjust Bolt
Feature Split Type Split Type Used in combination with SAT

Customer Service

  • Usage Method
  • Technical Question
  • Customization Products

NBK America LLC

8:00 to 17:00 on weekdays, Eastern Standard Time

Save to My List

  • BOOKMARK: You can bookmark your favorite pages.
  • PRODUCT FINDER: You can save your selection conditions.

BOOKMARK

PRODUCT FINDER

※Selection condition can be saved where Product Finder is available.
※Please remain the function of cookies for the browser and the JavaScript in effect when using this function.

Please correct the error in selection condition.
Please specify at least one select criterion.
Your request has been cancelled due to the duplicated page.